Industrial Coatings
  CONTACTS  
 

Industrial Coatings Department
Phone/fax: +7 (863) 203-71-31
E-mail: industrial@empils.ru

 

PF-133 Enamel / GOST 926-82

Gloss, %, not less than:

45

Relative viscosity at a temperature of (20±0.5)°Ñ, sec

40-80
Nonvolatile matter mass fraction, % :46-53

Drying time up to degree 3, not more than, at a temperature of:

 
(82±2)°Ñ, h 2

(20±2)°Ñ, h

24
Film hardness according to pendulum tester (pendulum A), relative units, not less than: 0.05
Film impact strength, cm, not less than: 50
Dried film hiding power, g/m2, not more than 20

Description:

The enamel is a pigment and extenders suspension in alkyd varnishes with the addition of organic solvents, dryer and other additives.

Field of application:

The enamel is used for painting cargo rolling stock (except for refrigerator cars), containers and other metal and wooden surfaces, exposed to atmospheric influences.

Properties:

Ready to use, atmosphere resistant, remarkable for high degree of adhesion with the painted surface. Coating, consisting of two enamel layers applied to prepared primed surface, preserves its protective properties for 3 years.

Application method:

The enamel is applied by hydraulic, airless spraying, electrostatic spray finishing, dipping, flow coat methods and with a brush to prepared dry clean surface.

Solvent:

Solvent, xylene, a mixture of solvent or xylene with white spirit, RE-4V, RE-3V thinner.

Package:

45 kg

Storage:

Warranty shelf life is 6 months from production date.

Colors:

Black and other colors as negotiated with the customer.